MK Teknology1 Private Limited
New Delhi, Delhi
GST No. 07AAFCM2477F1ZG
TrustSEAL Verified
Call 0804897973173% Response Rate
SEND EMAIL
PALAS optical fine dust measuring devices are the best aerosol spectrometers and have capability to measure real-time and simultaneously PM values including PMtotal, PM10, PM4, PM2.5 and PM1 and also particle number and particle size distribution in the measurement range down to at least 0.18 to 18 µm.
Product Details:
| Usage/Application | Air quality monitoring for indoor & outdoor for heath, safety and environment management (HSE) |
| Brand | Palas GmbH,Germany |
| Memory | 16 GB,Expandable with Micro SD |
| Operating Temperature | 0 Degree to 40 Degree C |
| Display Size | 1280 x 800 Pixels,8 Inch Touch Screen Operation Panel |
| Flow Rate | 1.4 LPM |
| Measuring Range | PM1,PM2.5,PM4,PM10,TSP,particle size distribution,pressure,temp,RH |
| Model Name/Number | Fidas Frog |
| Features | Communicates via WiFi with panel for remote location monitoring. On-site calibration capability. |
Fidas Frog is a portable aerosol spectrometer for measures simultaneously the environmentally relevant mass fractions PM1, PM2.5, PM4, PM10, TSP as well as the particle number and the particle size distribution within the particle size range of 0.18 – 100 µm. The very compact and light design as a portable hand-held monitor operates for 8 hours per charge battery or mains power. The Fidas ® Frog operates with a volume flow of 1.4 l/min and is equipped with sensors for environmental conditions, temperature, atmospheric pressure and relative humidity.
Product Details:
| Usage/Application | Regulatory & ambient air monitoring/campaign in pollution networks, emission source attribution etc |
| Brand | Palas GmbH,Germany |
| Memory | 4 GB |
| Operating Temperature | 5 Degree to 40 Degree C |
| Display Size | 800 x 480 pixel,7 inch Touch screen |
| Flow Rate | 4.8 LPM |
| Measuring Range | PM1,PM2.5,PM4,PM10,Temperature,Particle size distribution,RH,Pressure,Wind velocity etc |
| Model Name/Number | Type-approved according to latest EN requirements (EN 15267),on-site calibration capability |
| Features | On-site calibration capability |
Fidas® 200, Fidas® 200 E and Fidas® 200 S models are currently the only optical single particle measuring devices that are type approved for simultaneous monitoring of PM10 and PM2.5 according to standards VDI 4202-1, VDI 4203-3, EN 12341, EN 14907, EN 16450, EU Equivalence Guide GDE, certified in compliance with standards EN 15267-1 and -2 and UK (Defra Approval) in compliance with "MCERTS Performance Standards for CAMS" & "MCERTS for UK Particulate Matter". The certificate of product conformity according to EN 15267 issued by TÜV Rheinland and the German Federal Environmental Agency.
The sampling system is equipped with a Sigma-2 sampling head according to VDI 2119-4 for representative sampling even under strong wind conditions, and a drying line which prevents condensation from causing measurement errors. Intelligent Aerosol Drying System – IADS is controlled based on ambient air temperature, pressure, and relative humidity. An optional weather station can provide wind velocity, wind direction, and precipitation data and an external 47mm dia filter holder is integrated, which allows external chemical analysis of the aerosol composition.
Product Details:
| Usage/Application | Reliable,accurate information of air quality & Infection Risk Index for indoor & outdoor application |
| Brand | Palas GmbH,Germany |
| Accuracy | EN16450 certified Fidas 200 |
| Memory | 10 GB |
| Operating Temperature | -20 Degree to +50 Degree C |
| Display Size | 800 x 480 Pixel,5 Inch touch screen display |
| Flow Rate | 1 LPM |
| Measuring Range | PM1,PM2.5,PM4,PM10,particle size distribution,pressure,temp,RH,CO2,TVOC etc |
| Model Name/Number | AQ Guard/AQ Guard Ambient |
| Features | Prediction of inhalation of particles already exhaled by person & On-site calibration capability |
AQ Guard is currently the most advanced compact aerosol spectrometer for determining pollution by particulates using 900 optical light scattering, single particle counting (It’s not a nephelometer!!). AQ Guard is offered in two versions: Indoor Air and Outdoor Air. Both models have integrated touch screen display and measure PM2.5 and PM10 data simultaneously. Fine dust professional package with other PM values and particle size distribution is available as an option from 0.175 to 20 microns. AQ Guard has built in PC, therefore no cloud services required. AQ Guard is equipped with temperature, atmospheric pressure and relative humidity sensors.
AQ Guard: Indoor Air can be upgraded with Healthy Rooms package for CO2, TVOC, Air Quality Index and patent pending germ indicator.
AQ Guard Ambient: Outdoor Air is equipped with protective cover and a compact IADS to compensate humidity influence on PM data even at 100% Rh and eliminates fog droplets.